_edited_edited.png)
Jointed Bunny ITH Design
$10.00
This vintage-style Bunny Rabbit with jointed limbs and head can be posed in many charming ways. Make a few for Easter, or Spring Decor. Or gift them to your favorite Bunny Lover.
- The designs include 3 sizes.
- Includes 2 ear options – one for raw edge applique and one with knockdown stitches that give a neat shading effect on the inner ear fur.
- Your machine stitches most of the seams with a bit of hand stitching needed at the end to close the seams openings and attach the muzzle and ears.
- Instructions include diagrams for hand stitches, and color photos of the assembly process.
ITH Design Details
ITH stands for "In the Hoop" and refers to embroidery machine files that stitch a 3D project like this one.
.ZIP file Includes these machine embroidery file formats: DST, EXP, HUS, JEF, PES, SEW, VIP, VP3, XXX
Number of Hoopings: 5 for each size of bunny (ears, head, body, arms, legs)
Size Chart:
| size | hoop size** |
finished height* to top of head |
|---|---|---|
| small |
4x4" (100x100mm) |
7.5" (19 cm) |
| medium |
5x7" (130x180mm) |
11.5" (28 cm) |
| large |
6x10" (150x240mm)*** |
13" (34 cm) |
* Finished size may vary depending on how you assemble your project
** Please refer to the image with design thumbnails for exact design measurements to verify your hoops are large enough.
*** Fits Bernina and Viking 6x10" hoops without resizing
Skill Level
- Intermediate (rating based on multiple hoopings, doll joints, firm stuffing, and amount of hand stitching.
- Estimated time to complete: 2-4 hours depending on skill level
Tools and Materials Needed
Tools
• Embroidery machine (TIP – a size 14 needle may stitch better through multiple layers of thick fabrics)
• Sharp fabric scissors
• Hemostats or other turning tool for turning and stuffing the bunny
• Long doll needle and strong thread for closing the seam openings and attaching the muzzle.
Materials:
• Bunny Fabrics: See note below about fabric choices.
—-> Small bunny: ¼ yard, or 3 sheets of craft felt
—-> For medium bunny: ¼ yard
—-> For large bunny: 1/3 yard
• The bunny requires 5 hoopings. Each hooping will need 2 layers of fabric the same size as the hoop.
• Lightweight Cut-away or tear-away machine embroidery stabilizer for each hooping. See note in fabric choices below.
• Embroidery thread and bobbin to match your fabric, plus black for facial features
• Fiberfill stuffing
• Scrap of water or heat soluble stabilizer to use under the face detail stitches
• 5 sets of locking doll joints, or 4 buttons if button joints are preferred. (joint sizes: small bunny works better with button joints. Medium bunny uses 20-30mm joints. Large bunny uses 30-40mm joints)
• About fabric choices: This bunny was tested using felt, fuzzy felt, fleece, and short pile faux furs.
ZIP File Download
Embroidery Machine files are delivered in a .ZIP file with all files and instructions.
Your download will be available on a "Thank You" page immediately after purchase and you will also be emailed a link for that same download.
Please download files within 30 days of purchase.
Store Policies & Commercial Use
- You CAN sell limited quantities of the items you make with these digital files.
- You CANNOT share or sell these digital files, photos, or other copyright-protected materials.
- No refunds are given on digital products, this is the industry standard.
- Please refer to our Legal Page for complete store policies.
