ITH stands for "In the Hoop" and refers to embroidery machine files that stitch a 3D project like this one.  

• .ZIP file Includes these machine embroidery file formats: DST, EXP, HUS, JEF, PES, SEW, VIP, VP3, XXX
• Number of Hoopings: 3 hoopings for 6x10" (150x240mm) hoops, and 4 hoopings if using a 5x7"(130x180mm) designs.
• This design comes in one finished size which is 13” tall.  

Beginner level

Approximate time to complete: 2-4 hours

 Tools
• Embroidery machine with 5x7 hoop or larger
• Sharp fabric scissors
• Hemostats for turning and stuffing the doll
• Long doll needle and strong thread for closing the seam openings
• Pins to hold the stabilizer firmly in the hoop (the T-pin trick)

Materials
 • Doll skin fabric 

1. For limbs: 2 pieces - 8” x 6”
2. For body/head: 2 pieces - 8” x 8”
3. Panty/diaper fabric: 2 pieces - 6” wide x 5” tall

• Top and bobbin thread to coordinate with your doll project (white, black and red/pink for face)
• Fiberfill stuffing
• No-show mesh embroidery stabilizer, or similar lightweight cutaway stabilizer
• Scrap of water or heat soluble stabilizer to use under the face detail stitches
• Fusible stabilizer for thin or stretchy panty fabric
 

 Embroidery Machine files are delivered in a .ZIP file with all files and instructions.  

Your download will be available on a "Thank You" page immediately after purchase and you will also be emailed a link for that same download.  

 You CAN sell limited quantities of the items you make with these digital files.

You CANNOT share or sell these digital files, photos or other copyright protected materials.

No refunds are given on digital products, this is the industry standard.

Please refer to our Legal Page for full details on each of these points.